Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - SOLD - CJ Wide Track D30/AMC20 Lockrite 1-piece shafts
View Single Post
Old April 15th, 2011, 12:26 PM   #1
Are we there yet?
tweak's Avatar
Join Date: 04-20-06
Location: Auburn, Mi
Posts: 1,956
iTrader: (22)
Mentioned: 0 Post(s)
Default SOLD - CJ Wide Track D30/AMC20 Lockrite 1-piece shafts

Both of these axles are currently setup for SOA (Spring Over Axle) but the stock perches are in place.

Front Dana 30:
  • WT D30 from 1983 CJ7
  • Solid Brand HD diff cover
  • 4.10 gearing
  • Lockrite Locker
  • Newer rotors/calipers/diskpads
Rear AMC 20:
  • Wide Track AMC20 from 1983 CJ7
  • Cast HD diff cover
  • 4.10 gearing
  • Professionally Welded rear end by Ironman Offroad
  • Trussed
  • 1-piece axle shafts (Moser brand if I recall correctly)
  • Disk brakes (includes Metric Brand calipers disk rotors and disk pads)
The Rear AMC20 needs the yoke replaced. The current yoke was tempoarly fixed after the ubolt strap was wopped out. Also nocited a small amount of fluid leaking from the passanger side of the housing between the diff and the tube.

Axles are still mounted under the Jeep but will be removed in the coming weeks. They are located in Auburn, Michigan. I can help assist with delivery depending on location.

$SOLD obo

Sold AS-IS

Last edited by tweak; April 17th, 2011 at 01:55 PM.
tweak is offline  
Page generated in 0.12311 seconds with 22 queries