This is all you need to do since yours is a cable driven speedo. I have a couple gears that may be the right tooth count for you. You will need to pull the speedo cable from the transmission or tcase(4x4) and count the teeth on the gear then go here: http://www.tciauto.com/Products/Tech...eedo_gears.asp
to figure out what you need then just change to the right gear.
If you can read this, thank a teacher. If you can read it while pooping, thank Bill Gates!
"A girls butt hole is like a 9 volt battery. You know its wrong, but eventually you put your tongue on it."