Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - Kyle M. Ranger Truggy, rebuilt again - Revision 4
View Single Post
Old December 28th, 2010, 08:14 PM   #130
Kyle M.
KFM!
 
Kyle M.'s Avatar
 
Join Date: 10-24-10
Location: Howard City, MI
Posts: 8,483
iTrader: (19)
Mentioned: 18 Post(s)
Default

No prob man!

Some work done, changed steering up a little.








You get the idea, but it is all 3/4" heims, with 3/4" bolts. The pitman arm is still cooling at work so it isn't on, but it will be a 5/8" bolt in double shear. The tube is 1.5" dia 1/4 wall DOM. All the gussets and tabs are 1/4". I flipped the tie rod to the top of the knuckle also, so I gained a little clearance. I took 3" out of the drag link so it is the same length as the track bar, so my bump steer is better.

Last edited by Kyle M.; December 28th, 2010 at 08:18 PM.
Kyle M. is offline   Reply With Quote
 
Page generated in 0.05479 seconds with 20 queries