Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - 460 build
Thread: 460 build
View Single Post
Old July 7th, 2010, 05:26 PM   #10
IDIeselman
Senior Member
 
IDIeselman's Avatar
 
Join Date: 03-23-07
Location: ludington mi
Posts: 1,848
iTrader: (18)
Mentioned: 0 Post(s)
Default

400-425HP 460ci

Intake System:

750cfm Holley DP professionally calibrated for your application
Edelbrock Performer Rpm Intake Manifold

Cylinder Heads:

D0VE heads with mild port job and chambers polished
(315ish/180-ish cfm flow @.600)
Intake valve size 2.08
Exhaust valve size 1.65
Stock rockers.

Short Block:

Comp Cam XE262H Hydraulic flat tappet cam or equivalent
(Specs:262/270 adv., 218/224@.050, .513/.520, 110 LSA)
Compression around 9.5:1
Stock crank
Stock rods with good bolts
Standard volume oil pump
Stock oil pan with windage tray

Exhaust:

1 7/8" headers to dual 2.5" pipes with H-pipe. Good flowing 2.5" Magnaflow mufflers or equivalent.

Summary:

91-octane. Keep redline to 6000 rpm.

425-450HP 460ci

Intake System:

750cfm Holley DP professionally calibrated for your application
Edelbrock Performer Rpm Intake Manifold

Cylinder Heads:

D0VE head with mild port job, chambers polished, and port match
(315-ish/180-ish cfm @.600)
Intake valve size 2.08
Exhaust valve size 1.65
Roller rockers.

Short Block:

Comp Cam Custom Spec Hydraulic flat tappet cam or equivalent
Based on the Xtreme Energy Hydraulic Series
Intake Lobe 5443 and Exhaust Lobe 5203
(Specs:268/280 adv., 224/230@.050, .524/.544 lift, 110 LSA)
Compression around 9.5:1
Stock crank
Stock rods with good bolts
Standard volume oil pump
Stock oil pan with windage tray

Exhaust:

1 7/8" headers to dual 2.5" pipes with H-pipe. Good flowing 2.5" Magnaflow mufflers or equivalent.

Summary:

91-octane. Keep redline to 6000 rpm.

450-475HP 460ci

Intake System:

750cfm Holley DP professionally calibrated for your application
Edelbrock Performer Rpm Intake Manifold

Cylinder Heads:

D0VE head with mild port job, chambers polished and port match
(315-ish/180-ish cfm @.600)
Intake valve size 2.08
Exhaust valve size 1.65
Roller rockers.

Short Block:

Comp Cam XE274H Hydraulic flat tappet cam or equivalent
(Specs:274/286 adv., 230/236@.050, .562/.565, 110 LSA)
Compression around 9.5:1
Stock crank
Eagle I-beam rods
High volume oil pump
Deepened oil pan with windage tray

Exhaust:

1 7/8" headers to dual 2.5" pipes with H-pipe. Good flowing 2.5" Magnaflow mufflers or equivalent.

Summary:

91-octane. Keep redline to 6500 rpm.

475-500HP 460ci

Intake System:

750cfm Holley DP Carb professionally calibrated for your application
Edelbrock Performer Rpm Intake Manifold

Cylinder Heads:

D0VE heads with larger valves, port job, chambers polished and port match
(330-ish/190-ish cfm flow @.600)
Intake valve size increased to 2.19
Exhaust valve size increased to 1.76
Roller rockers.

Short Block:

Comp Cam XE274H Hydraulic flat tappet cam or equivalent
(Specs:274/286 adv., 230/236@.050, .562/.565, 110 LSA)
Compression at 9.8:1
Stock crank
Eagle I-beam rods
High volume oil pump
Deepened oil pan with windage tray

Exhaust:

1 7/8" headers to dual 3" pipes with H-pipe. Good flowing 3" Magnaflow mufflers or equivalent.

Summary:

91 octane. Keep redline to 6500 rpm.

500-525HP 460ci

Intake System:

750cfm Holley DP Carb professionally calibrated for your application
Edelbrock Performer Rpm Intake Manifold

Cylinder Heads:

TFS street heads with mild clean-up
Roller rockers.

Short Block:

Comp Cam XE274H Hydraulic flat tappet cam or equivalent
(Specs:274/286 adv., 230/236@.050, .562/.565, 110 LSA)
Compression around 10.0:1
Stock crank
Eagle I-beam rods
High volume oil pump
Deepened oil pan with windage tray

Exhaust:

1 7/8" headers to dual 3" pipes with H-pipe. Good flowing 3" Magnaflow mufflers or equivalent.

Summary:

91-octane. Keep redline to 6500 rpm.


The list goes on and on. This should get you started.
IDIeselman is offline   Reply With Quote
 
Page generated in 0.65847 seconds with 20 queries