Great Lakes 4x4. The largest offroad forum in the Midwest - View Single Post - SBC Heads, Intake, Cam SOLD
View Single Post
Old March 23rd, 2009, 04:05 PM   #1
Senior Member
frdboy's Avatar
Join Date: 07-16-13
Location: Grand Haven
Posts: 14,046
iTrader: (0)
Mentioned: 9 Post(s)
Default SBC Heads, Intake, Cam SOLD

1. a pair of #14096217 heads $200.00 obo
These are in good condition, ready to bolt on.

14096217 Iron heads, are centerbolt. They are 1987+ (and later) and feature 72 degree center bolts. Valves are 1.94 and 1.5 with 64cc combustion chambers. These came on 350 crate engines with 285 hp, although I have seen them listed as making 300/320 hp in some marine applications.

2. Edelbrock Performer Intake #2104 $75.00 obo
A little mud stained, could be blasted and look like new


Designed for street 262-400 c.i.d. Chevy V8s that have heads with canted center bolt holes. #2104 is stock replacement/street legal part for 302, 327, 350 V8s with OEM 4-bbl. carb.; except stock equipped EGR. Accepts late-model waterneck, air-conditioning, alternator, H.E.I. and have rear water crossover. #2104 accepts exhaust-heated chokes. For 1987-95 stock aluminum heads use #2101. Will not fit Chevrolet Bowtie or LT1 heads.

3. A used Comp cams Xtreme 4x4 cam # 12-243-3
With matching lifters $50.00

SB Chevy Xtreme 4x4 Series Camshaft #12-243-3. HYDRAULIC: Strong mid range and throttle response, likes headers, gears. 2200+ stall.

Advertised Duration 270 278
Duration @ 0.050 226 234
Valve Lift
W/1.5 Rocker .480 .498

Lobe Sep.
Angle 111

RPM Operating Range 1800-6000

I would make a package deal if someone was interested.

Last edited by frdboy; March 24th, 2009 at 02:17 PM.
frdboy is online now  
Page generated in 0.15621 seconds with 22 queries