Great Lakes 4x4. The largest offroad forum in the Midwest banner

Jeep T18 to a Dana 300?

2K views 12 replies 4 participants last post by  Chop 
#1 ·
im mounting a T18 to a scout dana 300 tcase i was wondering where i could get the drive gear to mount this trans to the d 300? also i have searched but not quite found anything. may be anyone has done this and has some pics or build information i should be aware of?

any info would help
 
#4 ·
I have not done this, but I avoided what you are trying to do by using a Ford T18, and a Novak D300 adapter. But, CJ7FUN on MJ has done this, and used to have a very extensive write up on it. You need the correct BullGear for the T/C. And from what I know, you can't use the one off your D20 T/C. There are others off of some Quadratrac T/C's that will work, but there are like 10 different BullGears used in a matter of 5 years, so have fun.

One post I found..........
http://michiganjeepers.com/groupee/forums/a/tpc/f/420109322/m/614102013/r/420106013#420106013
 
#9 ·
shawn said:
And the real write up cj7fun made, for some reason, the page won't open.

Man, rereading all those old posts, some good ol friends in there I haven't seen in a while.

Good luck on the swap.
Maybe once they are informed about this site, they will rejoin the online forums!

Hell, I've only been around in the offroad forums for 3 years now, and I can't believe how many people aren't around anymore
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top