d44

[Leanz]

I need a Drivers Drop D44 (preferably scout but if what you has matches most the the criteria, go for it!) - 5 on 5.5 , falt top knuckles ,manual hubs and eventually i will need 4.10s/carrier to match

offers?

[Saharaboy]

There are two in the barn behind my house, feel free to stop by and take them whenever you need them

[cracker$]

Drivers side pig, drum brakes, 5 on 5.5 wheels, 2.something gears.
40" spring perch to spring perch. approx. 65" wheel mount to mount.
Closed knuckle.
Located in Madison Heights. Is this what you want?

[Leanz]

Originally Posted by Yer Mom

Drivers side pig, drum brakes, 5 on 5.5 wheels, 2.something gears.
40" spring perch to spring perch. approx. 65" wheel mount to mount.
Closed knuckle.
Located in Madison Heights. Is this what you want? tsperow@hotmail.com

i need standard width

[PavementPounder]

Define "standard".

[Leanz]

Originally Posted by PavementPounder

Define "standard".

like waggy or scout.... stock YJ , NOT fullwidth

[cornfed]

Originally Posted by Leanz

like waggy or scout.... stock YJ , NOT fullwidth

Ok, now we're getting somewhere. FYI: Scout was never driver's drop. Waggy was driver's drop 1980-1990. Why not narrow a J10 or Ford D44?

[Leanz]

i just specified the width i wanted - that wasnt saying i just wanted those ones..... anywho i will take ANY "standard width" d44 driver drop. given that ihas shafts, carrier and brakes.

[350YJ]

i have a set of dana 44's out of a waggy. i think its a 89. make me an offer. it is driveable.

[Leanz]

i sent you a PM

and shortly after, i was informed that it wont have flat top knuckles and its a 6lug.

i need 5 on 5.5 - ANOTHER thing i should have specified!

[BIGBEN]

Originally Posted by Leanz

i sent you a PM

and shortly after, i was informed that it wont have flat top knuckles and its a 6lug.

i need 5 on 5.5 - ANOTHER thing i should have specified!

all you need is ford outers. that gives you the 5x5.5 on the waggy axle. at least that is what i am doing on mine. if i ever get the money to finish this project.


as far as i know you won't find a drivers drop d44 with flat top knuckles and 5x5.5 pattern with a width of 60 inches without swapping something around from another axle.

[clarkstoncracker]

Originally Posted by Leanz

i sent you a PM

and shortly after, i was informed that it wont have flat top knuckles and its a 6lug.

i need 5 on 5.5 - ANOTHER thing i should have specified!

Linzy, why not go with 6 lug?

I have an extra set of 15" 6 lug rims you can have... If that is a big deal to you, swap outers..

We can go pick up that waggy for 300 bucks in silverlake if you want.. That had the 44's in it

[350YJ]

i have a waggy in madison heights the only thing it does not have is an engine. i would probably be willing to get rid of it for close to 300 bucks and may even deliver it if it's not too far.

[Leanz]

and if i jsut want the axle..... because i live in clawson - my backyard is about 12x12' and we have city ordinences(sp?) about junk in our backyard

and i dont want a whole vehicle - thats why we dont need that waggy in silver lake! i only can FIT another axle in my garage- its paxkeed full of jeep stuff as it is

[Leanz]

BUMP...... 350YJ fell through

[Leanz]

bump

[Leanz]

Bummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmp

[Leanz]

yea

[2007JK]

I just saw an early bronco one for $150 somewhere (either here or MJ). It is driver drop, 5x5.5 and fairly narrow width. They had coil springs so you'd have to weld on spring perches. It was a 1976 so it had disc brakes. The only uncertainty is if it has flat-topped knuckles.

Run a search on both boards, I'm sure it will turn up.

Edit:

OK, I'm bored. I ran the search for you.

http://.com/groupee/f...22/m/558109216

If it turns out you buy this but swap on full-width flat-top knuckles, LMK. I'd be interested in the knuckles for our drum-braked EB D44.

Jeff

[Leanz]

thanks!! i sent him a PM