Spring Perches from Ruffstuff, Perches that fit!

Gravel Maker · January 1st, 2008, 01:32 PM

Spring perches, pretty basic, but made in 4 widths (2", 2 1/2", 2 3/4", 3") & 7 axle diameters for a perfect fit and not a "good enough" fit. With 3 pin placement options and long enough to help in controlling axle wrap. I'm only going to show you 4 perches here, we make 13 different perches and are regularily adding more. Why so many? Because the perch should be made to fit the axle and the ubolt plate, you shouldn't be made to make it fit! :D When you ask about perches ask about the radius of the cutout! BTW, We don't only make the perches, we make the Ubolt plates & Spring Hangers to match all of our Perches.......

They are mostly 1/4" thick but we do have 2 Heavy Duty models 3/8" thick! And yes, we have the U-Bolt plates to match......These stand 7/8" off the axle and we have been making many sizes for over 2 years, we did not just hop on the bandwagon. Compare sizes to what others are offering, we make the tube cutout for axle diameters that actually exist! And yes the holes are different on different models, not every manufacturer used the same spring pin!

Strength, Quality, & Value! Words to live by.....Originality is nice too!

Jsawduste · January 1st, 2008, 04:13 PM

Good stuff.
Most my HP D60 stuff is from Dan.

Gravel Maker · January 1st, 2008, 11:21 PM

Lots of you have been ordering these, Michigan is one of the states we have the most customers and I'm happy to be from the Great Lake State! But you know how life goes and now I am sufferring through another California winter.....Good luck to all in the new year!

Gravel Maker · April 7th, 2008, 10:14 PM

It was soooo cold, only 68 today!

Dalton · April 17th, 2008, 02:11 PM

Quote:

Originally Posted by Gravel Maker

It was soooo cold, only 68 today!

Dan, you bastard! Hahaha, just ordered some axle swap kits from you, can't wait to get them.

Gravel Maker · April 17th, 2008, 04:01 PM

What were you thinking?

Back to the important stuff, like the weather this past Sunday, miserable, 95 degrees! I can't wait to leave this hole!

January 1st, 2008, 01:32 PM	#1
Gravel Maker Steel Hauler Join Date: 10-29-07 Location: Sacramento (Rubicon) Ca Posts: 62 iTrader: (2)	Spring Perches from Ruffstuff, Perches that fit! Spring perches, pretty basic, but made in 4 widths (2", 2 1/2", 2 3/4", 3") & 7 axle diameters for a perfect fit and not a "good enough" fit. With 3 pin placement options and long enough to help in controlling axle wrap. I'm only going to show you 4 perches here, we make 13 different perches and are regularily adding more. Why so many? Because the perch should be made to fit the axle and the ubolt plate, you shouldn't be made to make it fit! :D When you ask about perches ask about the radius of the cutout! BTW, We don't only make the perches, we make the Ubolt plates & Spring Hangers to match all of our Perches....... They are mostly 1/4" thick but we do have 2 Heavy Duty models 3/8" thick! And yes, we have the U-Bolt plates to match......These stand 7/8" off the axle and we have been making many sizes for over 2 years, we did not just hop on the bandwagon. Compare sizes to what others are offering, we make the tube cutout for axle diameters that actually exist! And yes the holes are different on different models, not every manufacturer used the same spring pin! Strength, Quality, & Value! Words to live by.....Originality is nice too! __________________ Dan Fredrickson www.ruffstuffspecialties.com 916.600.1945 Your Fabrication Parts Source Register On our website for member Specials & Free Stickers! Last edited by Gravel Maker; January 31st, 2008 at 11:27 AM.

January 1st, 2008, 11:21 PM	#3
Gravel Maker Steel Hauler Join Date: 10-29-07 Location: Sacramento (Rubicon) Ca Posts: 62 iTrader: (2)	Thank You! Lots of you have been ordering these, Michigan is one of the states we have the most customers and I'm happy to be from the Great Lake State! But you know how life goes and now I am sufferring through another California winter.....Good luck to all in the new year! __________________ Dan Fredrickson www.ruffstuffspecialties.com 916.600.1945 Your Fabrication Parts Source Register On our website for member Specials & Free Stickers!

April 7th, 2008, 10:14 PM	#4
Gravel Maker Steel Hauler Join Date: 10-29-07 Location: Sacramento (Rubicon) Ca Posts: 62 iTrader: (2)	I was suffering again today! It was soooo cold, only 68 today! __________________ Dan Fredrickson www.ruffstuffspecialties.com 916.600.1945 Your Fabrication Parts Source Register On our website for member Specials & Free Stickers!

April 17th, 2008, 04:01 PM	#6
Gravel Maker Steel Hauler Join Date: 10-29-07 Location: Sacramento (Rubicon) Ca Posts: 62 iTrader: (2)	And you didn't try the new Dodge kit? What were you thinking? Back to the important stuff, like the weather this past Sunday, miserable, 95 degrees! I can't wait to leave this hole! __________________ Dan Fredrickson www.ruffstuffspecialties.com 916.600.1945 Your Fabrication Parts Source Register On our website for member Specials & Free Stickers!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register to remove all ads. Registration is free! Sponsored Links
Great Lakes 4x4 Advertisement

January 1st, 2008, 04:13 PM	#2
Jsawduste Senior Member Join Date: 08-02-06 Location: New Baltimore Posts: 497 iTrader: (8)	Good stuff. Most my HP D60 stuff is from Dan.