breather tube for dodge trans - Great Lakes 4x4. The largest offroad forum in the Midwest

Chop · July 28th, 2006, 07:30 PM

heres a nice little bit of info i found for you dodge guys

http://www.pavementsucks.com/forums/...hp?topic=49209

KILLER"B"468 · August 4th, 2006, 12:38 AM

If you see where his breather is at it is behind where the band goes. This allows the oil to be slung at the breather while it is running. I locate mine over the band this way it is sheilded. I have been doing this to dodge trannies for many, many years.

84Scrambler · August 4th, 2006, 07:29 AM

That is exactly how I did the breather on my 46re. 90* fitting and a hose thru the bell housing up into the engine compartment.

KILLER"B"468 · August 4th, 2006, 09:41 AM

Quote:

Originally Posted by 84Scrambler

That is exactly how I did the breather on my 46re. 90* fitting and a hose thru the bell housing up into the engine compartment.

I have done it that way in the past, but I like it on the outside of the case. You can get better fittings with better orifices for venting.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register to remove all ads. Registration is free! Sponsored Links
Great Lakes 4x4. The largest offroad forum in the Midwest Advertisement